#include "eoD2EEProfile.h"

Include dependency graph for eoEEP_D250xx.h:

This graph shows which files directly or indirectly include this file:

Enumerations

enum	D250xx_COMMANDS { VENTILATION_REQUEST = 0x00, VENTILATION_CONTROL = 0x01, VENTILATION_BASIC_STATUS = 0x02, VENTILATION_EXTENDED_STATUS = 0x03 }
	Command enums for D2-50-xx profiles. More...

enum	D250xx_INDEX { REQUESTED_MSG_TYPE = 0x00, DIRECT_OP_MODE = 0x01, OP_MODE_CTRL = 0x02, HEAT_EXCHANGE_CTRL = 0x03, TIMER_OP_CTRL = 0x04, SAFTEY_MODE = 0x05, SUPPLY_AIR_POS = 0x06, EXHAUST_AIR_POS = 0x07, DEFROST_MODE = 0x08, COOLING_PROTECTION = 0x09, OUTDOOR_HEATER_STATUS = 0x0A, SUPPLY_HEATER_STATUS = 0x0B, DRAIN_HEATER_STATUS = 0x0C, TIMER_OP_CTRL_STATUS = 0x0D, FILTER_MAINTENANCE = 0x0E, WEEKLY_PROGRAM = 0x0F, ROOM_TEMP_CTRL = 0x10, AIR_QUALITY_1 = 0x11, AIR_QUALITY_2 = 0x12, MASTER_SLAVE_CONFIG = 0x13, OUTDOOR_TEMP = 0x14, SUPPLY_TEMP = 0x15, INDOOR_TEMP = 0x16, EXHAUST_TEMP = 0x17, SUPPLY_FAN_RATE = 0x18, EXHAUST_FAN_RATE = 0x19, SUPPLY_FAN_SPEED = 0x20, EXHAUST_FAN_SPEED = 0x21, SW_VERSION = 0x22, DIGITAL_INPUT_STATUS = 0x23, DIGITAL_OUTPUT_STATUS = 0x24, INFO_MSG_STATUS = 0x25, FAULT_STATUS = 0x26, CO2_TRHESHOLD = 0x27, AIR_QUALITY_TRHESHOLD = 0x28, ROOM_TEMP = 0x29 }
	Index enums for D2-50-xx profiles. More...

enum	D250_REQUESTED_MSG_TYPE { VENTILATION_BASIC = 0x00, VENTILATION_EXTENDED = 0x01 }
	Requested message enums for D2-50-xx profiles. More...

enum	D250_DIRECT_OP_MODE { DIRECT_MODE_OFF = 0x00, DIRECT_MODE_LEVEL_1 = 0x01, DIRECT_MODE_LEVEL_2 = 0x02, DIRECT_MODE_LEVEL_3 = 0x03, DIRECT_MODE_LEVEL_4 = 0x04, DIRECT_MODE_AUTO = 0x0B, DIRECT_MODE_AUTO_OD = 0x0C, DIRECT_MODE_SUPPLY_ONLY = 0x0D, DIRECT_MODE_SEXHAUST_ONLY = 0x0E, DIRECT_MODE_NO_ACTION = 0x0F }
	Direct operation mode enums for D2-50-xx profiles. More...

enum	D250_OP_MODE { OP_NO_ACTION = 0x00, OP_NEXT = 0x01, OP_PREVIOUS = 0x02 }
	Operation mode enums for D2-50-xx profiles. More...

enum	D250_AIRFLAP_BYPASS { AIRFLAP_BYPASS_NO_ACTION = 0x00, AIRFLAP_BYPASS_CLOSE = 0x01, AIRFLAP_BYPASS_OPEN = 0x02 }
	Heat Exchanger Bypass Control for D2-50xx -profile. More...

enum	D250_AIRFLAP_BYPASS_STATUS { AIRFLAP_BYPASS_STATUS_CLOSED = 0x00, AIRFLAP_BYPASS__STATUS_OPENED = 0x01 }
	Air flap and bypass enums for D2-50-xx profiles. More...

Enumeration Type Documentation

◆ D250_AIRFLAP_BYPASS

enum D250_AIRFLAP_BYPASS

Heat Exchanger Bypass Control for D2-50xx -profile.

Enumerator
AIRFLAP_BYPASS_NO_ACTION	Air flap and bypass close 0
AIRFLAP_BYPASS_CLOSE	Air flap and bypass close 1
AIRFLAP_BYPASS_OPEN	Air flap and bypass open 2

◆ D250_AIRFLAP_BYPASS_STATUS

enum D250_AIRFLAP_BYPASS_STATUS

Air flap and bypass enums for D2-50-xx profiles.

Enumerator
AIRFLAP_BYPASS_STATUS_CLOSED	Air flap and bypass is closed 0
AIRFLAP_BYPASS__STATUS_OPENED	Air flap and bypass is open 1

◆ D250_DIRECT_OP_MODE

enum D250_DIRECT_OP_MODE

Direct operation mode enums for D2-50-xx profiles.

Enumerator
DIRECT_MODE_OFF	Off 0
DIRECT_MODE_LEVEL_1	Level 1 1
DIRECT_MODE_LEVEL_2	Level 22
DIRECT_MODE_LEVEL_3	Level 3 3
DIRECT_MODE_LEVEL_4	Level 4 4
DIRECT_MODE_AUTO	Automatic 11
DIRECT_MODE_AUTO_OD	Automatic on Demand 12
DIRECT_MODE_SUPPLY_ONLY	Supply Air Only 13
DIRECT_MODE_SEXHAUST_ONLY	Exhaust Air Only 14
DIRECT_MODE_NO_ACTION	No Action/ Keep Current Mode 15

◆ D250_OP_MODE

enum D250_OP_MODE

Operation mode enums for D2-50-xx profiles.

Enumerator
OP_NO_ACTION	No Action 0
OP_NEXT	Select Next Operation Mode (edge-trigger) 1
OP_PREVIOUS	Select Previous Operation Mode (edge-trigger) 2

◆ D250_REQUESTED_MSG_TYPE

enum D250_REQUESTED_MSG_TYPE

Requested message enums for D2-50-xx profiles.

Enumerator
VENTILATION_BASIC	Ventilation Basic Status 0
VENTILATION_EXTENDED	Ventilation Extended Status 1

◆ D250xx_COMMANDS

enum D250xx_COMMANDS

Command enums for D2-50-xx profiles.

Enumerator
VENTILATION_REQUEST	Ventilation Remote Transmission Request 0
VENTILATION_CONTROL	Ventilation Control 1
VENTILATION_BASIC_STATUS	Ventilation Basic Status 2
VENTILATION_EXTENDED_STATUS	Ventilation Extended Status 3

◆ D250xx_INDEX

enum D250xx_INDEX

Index enums for D2-50-xx profiles.

Enumerator
REQUESTED_MSG_TYPE	Requested Message Type 0
DIRECT_OP_MODE	Direct Operation Mode Control 1
OP_MODE_CTRL	Operation Mode Control 2
HEAT_EXCHANGE_CTRL	Heat Exchanger Bypass Control 3
TIMER_OP_CTRL	Timer Operation Mode Control 4
SAFTEY_MODE	Safety Mode Status 5
SUPPLY_AIR_POS	Supply Air Flap Position 6
EXHAUST_AIR_POS	Exhaust Air Flap Position 7
DEFROST_MODE	Defrost Mode Status 8
COOLING_PROTECTION	Cooling Protection Status 9
OUTDOOR_HEATER_STATUS	Outdoor Air Heater Status 10
SUPPLY_HEATER_STATUS	Supply Air Heater Status 11
DRAIN_HEATER_STATUS	Drain Heater Status 12
TIMER_OP_CTRL_STATUS	Timer Operation Mode Control Status 13
FILTER_MAINTENANCE	Filter Maintenance Status 14
WEEKLY_PROGRAM	Weekly Timer Program Status 15
ROOM_TEMP_CTRL	Room Temperature Control Status 16
AIR_QUALITY_1	Air Quality Sensor 1 17
AIR_QUALITY_2	Air Quality Sensor 2 18
MASTER_SLAVE_CONFIG	Master/Slave Configuration Status 19
OUTDOOR_TEMP	Outdoor Air Temperature 20
SUPPLY_TEMP	Supply Air Temperature 21
INDOOR_TEMP	Indoor Air Temperature 22
EXHAUST_TEMP	Exhaust Air Temperature 23
SUPPLY_FAN_RATE	Supply Air Fan Air Flow Rate 24
EXHAUST_FAN_RATE	Exhaust Air Fan Air Flow Rate 25
SUPPLY_FAN_SPEED	Supply Fan Speed 26
EXHAUST_FAN_SPEED	Exhaust Fan Speed 27
SW_VERSION	Software Version Info 28
DIGITAL_INPUT_STATUS	Digital Input Status 29
DIGITAL_OUTPUT_STATUS	Digital Output Status 30
INFO_MSG_STATUS	Info Message Status 31
FAULT_STATUS	Fault Status 32
CO2_TRHESHOLD	CO2 Threshold 33
AIR_QUALITY_TRHESHOLD	Air Quality Threshold 34
ROOM_TEMP	Room Temperature 35

Enumerations