Download firmware with DolphinStudio

This article applies to:
DolphinStudio
DolphinBased Modules

QUESTION

I have downloaded firmware from EnOcean wepage (.hex files) and want to update my module. How to do it?

ANSWER

Use DolphinStudio interface to program your Modules.
Step-by-step manual:

1. Conncet your module with a EVA Board and conncet and EOP (EnOcean Programmer)
2. If power switch present on EVA Board, turn ON
3. Start DolphinStudio

Steps in DolphinStudio:

1. Select Programmer in Drop Down List
2. Select EOPX Programmer in TABs Menu
3. Select Firmware to-be-donwloaded by clicking on Browse
4. Select Write Operation
5. Click on Execute